The price will depend on your overall size. A good rule of thumb is to plan to spend about $70 per linear foot for the regular ProWall® boards (great for dek hockey, ball hockey, and roller hockey) and $95 per linear foot for ProWall-ICE® (used for outdoor ice hockey).
Amazingly, what are the boards on a hockey rink called? The “side boards” are the boards along the two long sides of the rink. The half boards are the boards halfway between the goal line and blue line. The sections of the rink located behind each goal are called the “end boards”. The boards that are curved (near the ends of the rink) are called the “corner boards”.
Subsequently, how much does it cost to advertise on hockey boards? The cost for a 3′ x 8′ advertisement on the Arena Boards is $746 per year (plus HST). The cost for rink board advertising when purchasing 15 spaces or more is $392..
Moreover, how thick are ice hockey boards? 1/2 Thick Solid Polyethylene Plastic panels with 5/8″ thick verticals every 2 feet.
Considering this, what are hockey boards made of? Puckboard, sometimes called arena board or hockey board, is a versatile, adaptive plastic material. Made of sturdy HDPE (High Density PolyEthylene), puckboard is tough resilient, and can take a beating without cracking or breaking even in freezing temperature.RINK SURROUNDS The kickplate at the bottom of the boards is light yellow. The boards are constructed so that the surface facing the ice is smooth and free of any obstruction or any object that could cause injury to players.
What is a dasher in hockey?
Dasher. The boards, referred to when a player caroms the puck off the boards to clear the puck of their defensive zone or to execute a pass.
How much do NHL ice ads cost?
This Star article from 2008 lists the cost as being up to $600,000. A different site listed dasherboard partnerships with the Wild at $300,000, but is clear that the cost provides more than just the dasherboard ads.
How much does it cost to sponsor a hockey team?
The sponsorship rate for a House League team is $450. The sponsorship rate for a Select team is $500 per home or away set of jerseys or $1000 for both.
When did the NHL start putting ads on the boards?
Starting with the 1978-79 season, NHL teams were allowed to sell ad space on their rink boards. However, the first display ad featured on an NHL rink board appeared in 1980.
What do you use for hockey boards?
7 sheets of 5/8″ thick plywood (4 feet x 8 feet) 22 pieces of two-by-fours, each measuring 12 feet in length (total of 256 feet) to be used for framing the back of my boards since I wanted my boards to be very strong. Outdoor wood paint with strong adhesion and penetration, and waterproof.
How do you support ice rink boards?
What can you use for ice rink boards?
Plywood boards store easily since they are actually half the thickness of “2 by” lumber. Plywood is better for building a hockey rink because you can have taller boards.
How tall are NHL boards?
The rink shall be surrounded by a wooden or fiberglass wall or fence known as the “boards” which shall extend not less than forty inches (40″) and not more than forty-eight inches (48″) above the level of the ice surface. The ideal height of the boards above the ice surface shall be forty-two inches (42″).
What is the plastic on hockey boards?
HDPE is the material of choice for dasher boards because of its high impact strength, durability, smooth finish, moisture resistance, and low maintenance requirements. Its extreme resilience to impact in colder temperature makes it the ideal, logical choice for ice hockey rinks.
Can you paint puck board?
Description: Puck Board is a durable, moisture resistant HDPE sheet used for many everyday applications. It is easy to clean, resists abrasion and is easy to use. Oftentimes it is used to replace plywood as it doesn’t rot, corrode, or require painting.
How much is a Zamboni Electric 552?
We had the chance to take the all-electric Zamboni 552 ($160,000) model for a spin at the East West Ice Palace in Artesia, CA, and the drive was, as expected, extraordinary. The Zamboni 552 boasts a massive 17.5 horsepower electric motor that gets it to 60 mph…
What is hockey rink glass?
Hockey glass is the glass around the boards at ice hockey rinks. There are primarily four reasons for this glass. Firstly, it protects the spectators from getting hit by any line-drive pucks. Flying pucks can cause severe injuries, and installing hockey glass is a sure-fire way to prevent a fan from getting hurt.
Is it cold in an ice skating rink?
While it is common knowledge that ice freezes at 32 degrees that is hardly the ideal ice to skate on. Most ice rinks will keep the air temperature at a brisk 55-65 degrees and the on-ice temperature between 17 and 29 degrees.
What is a cookie in hockey?
Top cookies: top shelf (where grandma hides the cookies) Trapezoid: the area behind the net where a goalie is allowed to play the puck. Turtle: when a player completely covers himself up as to not be involved in a fight. Twig: a hockey stick, also derived from when they used to be made of wood.
What is a muffin in hockey?
Muffin: a shot that should have been stopped after wavering back and forth in the air all the way to the net. Pillows: the goaltender’s leg pads. Plumber: maybe not the best player on the team, but a hard working player who does the dirty work in the corners.
What does Apple mean in hockey?
Apple: an assist. Bar Down/Bar Mexico: a type of shot that hits the bottom of the crossbar and shoots right down into the net. All beauties (see below) attempt to go bar down whenever possible, as it is seen as a very impressive shot. Just listen to the sound as the puck hits the bar and goes in below.
How do they put logos on hockey ice?
White powdered paint is mixed with water in a large tank creating a liquid paint mix. This paint is then applied to the ice surface with a large 12-foot spray boom and a pump. Two to three coats are applied to cover the surface. This is then sealed in with fine water spray, which freezes.
How do they change advertising on hockey ice?
Going virtual The “perimeter signage” technology allows the NHL to replace physical, in-arena sponsors on the boards with interchangeable virtual ads during telecasts. The NHL invested in London-based company Supponor to develop the ads, which Wachtel said will allow brands to have ownership of what appears.
How do they change logos on ice?
Using edgers and resurfacers, crews cut into the ice about three-quarters of an inch. They’ll then start painting white paint over the Wild sponsors’ logos, like Ecolab, Toyota and Xcel Energy. Those logos, along with the lines and Wild logo, are permanently painted into the ice.
