Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club is far more expensive.
Subsequently, how much does a golf club shaft cost? The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
Moreover, can you buy a new shaft for a golf club? While there is no one golf shaft that fits everyone, there is certainly one that is best for you. Visit your Golf Galaxy store for a professional Shaft Fitting. Our skilled Certified Club Technicians will then help you replace your golf shafts in the full service Club Tech Workshop.
Amazingly, can I change the shafts in my irons? When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you’re unfamiliar with the process, you can visit the Golf Services PROS at your local DICK’S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.
Also the question is, how far should you hit a 7 iron? A standard amateur golfer can hit a 7 iron from 128 yards to 158 yards. The lower range will be for women and senior golfers. To hit the ball over 150 yards in total distance with a 7 iron club, an amateur golfer will have to have a good swing and be physically fit.
Is it difficult to Reshaft irons?
Yes, you can do it yourself. It’s not a difficult process if you are careful. The advice of the first poster (jimb) was very good. I would use caution as far as the swing characteristics of reshafting.
Can I change my steel shafts to graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It’s a little involved, but completely doable.
How do I get a new driver shaft?
Briand’s recommendation is to use your current driver shaft as a baseline. If your shots tend to be low and with little spin, try a slightly softer flex. If your shots are ballooning, try a stiffer flex. If you’re caught between two flexes, you can “tip” a softer flex to make it stiffer in the tip section.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How do I buy a golf shaft?
When you want to choose a new golf shaft try and find a shaft that matches your swing speed and produces the right ball flight for you. A low torque will make the golf shaft twist less so if you have a high swing speed you will look for golf shafts with a lower torque and vice versa.
Can golf irons be refurbished?
Restoration Examples: Refurbishing Irons entails buffing and polishing the sole & toe, re-painting scoring lines and refinishing the face. We are not able refurbish shafts or ferrules, so they will remain in the same condition prior to refurbishing the club head.
How much does it cost to re shaft a driver?
The cost of replacing the shaft, excluding the shaft, is in the range between $25 and $45. This includes the cost of the grip and approximately $20 in labor cost. Adjustable shafts may require a sleeve adaptor that can set you back in the region of $14.
Will TaylorMade replace a dented driver?
If a defect in a genuine TaylorMade product appears during the warranty period of the product, and you comply with the requirements above, TaylorMade, in its sole discretion, will (1) replace the defective product with the same or a comparable product, or (2) refund your actual purchase price less reasonable …
How long does it take to Reshaft a golf club?
Depends on the epoxy, it should say somewhere on the epoxy the cure time… most are 24 hrs, but there’s many ‘Tour Set’ epoxies that cure shorter (~6-8 hrs is common).
How do you Reshaft a golf club at home?
Can graphite golf shafts be reused?
Continuously reusing graphite shafts is not a good habit either. Each time the shaft is exposed to a heat source, there has to be some effect to the shaft.
How far should a 70 year old man hit a golf ball?
A 70-year-old man should be hitting a driver anywhere from 180 to 190 yards. This number has grown a bit in the last few years with the introduction of improved driver and shaft technology. At 70 years old, some golfers are having no trouble getting the ball to fly 200 yards or more.
Why do I hit my 3 wood farther than my driver?
Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it’s a funny thing with the driver and its loft compared to the other clubs in the bag.
How far does average golfer hit driver?
Here’s an interesting fact: While PGA Tour pros hit their drives anywhere from 280 yards to 320 yards on average, and LPGA Tour pros hit their drives from 230 to 270 yards on average, most recreational golfers, according to Golf Digest, average somewhere around 195-205 yards with their drivers.
How can I test my swing speed at home?
There only truly accurate way to find out your swing speed is to measure it on a launch monitor as you hit balls out onto a range. Male tour professionals swing in the 115-120 mph range while average amateurs fall closer to the 80-85mph range.
What happens if your iron shafts are too soft?
If a golfer is using a shaft that is too flexible, here are the likely results: 1. The ball will possibly fly higher for any given loft. If the golfer is using the proper loft for his or her swing mechanics, this could cause a slight decrease from the golfer’s maximum potential distance.
What happens if a golf shaft is too flexible?
If the shaft is too flexible, you will have a ‘whippy’ feeling in your hands, and you won’t be able to feel the clubhead on the downswing. When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a ‘ballooning’ effect on the shot and it will tend to go quite high.
What is best steel or graphite golf clubs?
Steel tends to have very low torque (rotation during the swing) and also a stiffer tip section, while graphite can offer much higher torque rates and more flex in the tip. This combination will help with launch and also help you swing faster with less effort.
How do you Reshaft irons with graphite shafts?
Are steel or graphite clubs better?
Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.